Rise (FIXED) |
Run |
Angle |
|
How it works:
Enter Rise first (workpiece thickness.)
Enter run or angle, get the remaining value.
Change rise or run, get new angle.
Change angle, get new run.
- RISE is assumed to be FIXED workpiece thickness, and will not autochange, but may be overtyped at any time.
- RUN is assumed to be a variable result, and will change with change in ANGLE.
- ANGLE is assumed to be constantly variable, and will change with change in either RISE or RUN.
- "Clear All" resets all boxes to zero.
|
NOTE: Calculation will occur after you change a
value and then click outside the boxes - anywhere on the page background.
|
Please let me know if
this doesn't meet your needs, and we'll fiddle with variations.
JWPopp 02/07/2007
Suggestion: The calculator is hosted at a personal site, and is subject to the usual potential for
malicious interference, site change, etc. If you like and are able to use the calculator to advantage, I'd suggest
that you download and save it on your computer as a web page (it's only 8k.) JWP
Copyright Disclaimer:
It is my intent that this page be freely available for use, download, or any legal purpose by any person,
with the sole restriction that it not be duplicated for profit. The javascript contained herein is copyrighted,
and may not be duplicated for profit without express permission of the writer. JWP
|
